Trunks Hueforge

Project: Trunks.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 207.41x353.97mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.56mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.5 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #000000 PLA BambuLab Basic Black Transmission Distance: 0.5 #ae96d4 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 9 unique filaments Swap Instructions: Start with BambuLab Matte Charcoal At layer #7 (0.72mm) swap to BambuLab Basic Blue Gray At layer #10 (0.9