TRX4M Simple Buggy Chassis

Simplified Buggy Chassis for the TRX4M, designed specifically to maximize the crawling capability of a stock TRX4M. NO AFTERMARKET PARTS REQUIRED. Designed to integrate with all stock components with no modification. This chassis was directly compared to a built out Injora Tarantula and outperforms it in many scenarios, specifically articulation, vertical climbing and side hill. I printed it with Bambu's PLA Basic with 6 wall loops and a 25% gyroid infill and it has survived multiple drops off the table with no issues so far. Recommendations: Velcro the stock ESC to the roof on the flat area as close to the front as possible, be sure to place in an area where the battery wiring can still accessed. Run the shocks upside down to eliminate the need for shock spacers and to keep the weight as low as possible. Print the linked TRX4M High Trail rear links and well as extended hex's to further improve vertical climbing, side hill and prevent wheels from binding on the shocks. TRX4M Suspension