Slicer Discord
TS100 Case 2 Tips + Accessories – 3D-printbaar model van MakerWorld MakerWorld
Electronics

TS100 Case 2 Tips + Accessories

6 Downloads
1 Likes
0 Makes
Model downloaden
Mainly remixed from the TS100 Case Model Since I only wanted room for 2 tips, I removed the others. I also added a small elevation for the screws to sit in so they don't get lost. The space for the Allen key was already provided.However, I had problems with the fitment of the TS100. So, I used the model of the soldering iron provided in the original, made it a bit bigger, and replaced it in the model. This resulted in a much looser fit, similar to the tips, allowing for quicker and easier access. There are 2 versions: one with the TS100 text and one without. I painted mine with a sharpie. AMS or similar methods will not really work because the screw elevation is higher than the text. Other parts can be found on the original (the spacer and the lid). The idea for the screw elevation came from this model. I also printed it, but it was too tight in many places. Enjoy! (I also have this weird thing with the text while slicing, barely visable on the print with white filament tho → that
Categorie
Electronics
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
2 kleuren
Eendelig 2 kleuren / AMS Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Kleuren
2 (AMS/MMU aanbevolen)
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie