TS100 Dewalt Holder

Wanted an easy way to use the Dewalt USB battery adapter I had with the TS100.

I liked BlaydeRunners idea but wanted to make it a bit easier to make for others. This requires zero soldering/crimping etc. Just print and hot glue onto your adapter.

Print the main base as it imports with supports on the print bed.

Do not leave this plugged in when not in use. These have a phantom draw and will kill a battery if left on top for too long.

Including STEP for easy modifications.

Material:
Dewalt adapter (DCB090 Clone): https://www.amazon.com/dp/B081T1ZLBR?psc=1&linkCode=sl1&tag=eman04d-20&linkId=7747eadb272a0b4e6b509bf06326988d&language=en_US&ref_=as_li_ss_tl
608-ZZ bearing: https://www.amazon.com/dp/B081T1ZLBR?psc=1&linkCode=sl1&tag=eman04d-20&linkId=7747eadb272a0b4e6b509bf06326988d&language=en_US&ref_=as_li_ss_tl
M3x15mm bolts and Nuts:
Sponge:
Hot glue gun/ epoxy / VHB tape