Thingiverse
TTGO T4 Case
von dstarke
1
Downloads
0
Likes
0
Makes
A case for the TTGO T4 v1.3 ESP32 development board.
Only two of three buttons are available as the remaining one is also connected to an internal sensor and therefore not fully usable as user button. Furthermore, boot and reset switches are not made accessible from outside as these are only needed during development and not during operation.
Necessary for assembly:
- 4x M2x12mm
Note that it is not necessary to drill threads into the bottom part if printed with the correct tolerance.
See also https://github.com/daniel-starke/TtgoT4Clock
Only two of three buttons are available as the remaining one is also connected to an internal sensor and therefore not fully usable as user button. Furthermore, boot and reset switches are not made accessible from outside as these are only needed during development and not during operation.
Necessary for assembly:
- 4x M2x12mm
Note that it is not necessary to drill threads into the bottom part if printed with the correct tolerance.
See also https://github.com/daniel-starke/TtgoT4Clock
dstarke veröffentlicht auch auf
42 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
