Tubing Adapter Customizable

This is a tubing adapter with a few customization parameters in On-shape. It is made for use with vinyl tubing and has an interference fit on the ribs. For smaller tubing this may need to be printed on an SLA or DLP printer or with a small nozzle, if you are having trouble try my ultra simple tubing sleeve which super easy to customize.

Variables:
ID: Inner diameter of the addapter
L: Length of the portion that is to go into the tubing
Ld: Large end diameter(ID of larger tubing)
Sd: Smaller end diameter(ID of smaller tubing)
Tolerance: The tolerance between the non ribbed section of the adapter and the ID of the tubing, adjust this for fit depending on your printer tolerances and how tight you want the adapter(must be between 0-0.025")

ON-SHAPE DOCUMENT HERE: https://cad.onshape.com/documents/9ce4cfa03e624a2dd4b5f2d3/w/101f37edd98fbd5f7c71c180/e/683bc8de0e68daec63e576c4


Note: Stl file is in inches if your slicers default is in mm make sure to convert the units.