Tubular Key (Customizable)

# About
This is a model of a "standard" 7.8mm (technically 7.92mm) tubular key. The default settings are 7 pin and the key code order is set to Chicago Ace.

# Customizing
Use the .scad file to customize. The .stl file is an example export of the key code 1234567.

### Key Code
Set the key_code array to the bitting you want to duplicate. If you are looking at the key with the end pointed towards you, the code is read starting at the top moving counterclockwise.

If you have a code from a Fort Lock Gem key, you will need to reverse the order of the code.

If you are duplicating a key with a different number of cuts, you can shorten or lengthen the key_code array. Note that the first cut is cut_shift degrees counterclockwise from the top. If you want a cut at the top of the key, you may have to rearrange the code so that cut is the last one.

### 0 Cuts
Entering a key code of 0 causes no cut to be made in that spot. This is not only useful for key codes of 0, but also when