Thingiverse
Tumbleweed Plane
door Twisted2aT
22
Downloads
11
Likes
0
Makes
The 'Tumbleweed' is inspired by Experimental Airlines build techniques (https://www.youtube.com/user/ExperimentalAirlines), the popular Mini Talon, and other EA type builds from the FPV & RC community. I designed and built this for 3 reasons:
1. Put a spare motor to use that I had no idea what to do with.
2. CAD and 3D printing design skill improvement.
3. Expand on the EA build techniques to include 3D printed parts for unique configurations and easier repair/replacement of hardware after destructive crashes.
This is a work in progress, with lots of room for improvement and weight savings. My current version is ~2.1kg with a 4,000mAh 6S battery all the way up front against the front Bulkhead. Below is my parts list for electronics and the print materials & parameters I used for the first iteration.
AUW ~2kg (with GoPro)
Wingspan: 60 inches
Wing chord: 9.5 inches
Fuse Length: ~32 inches
Motor: Cobra 2820 840kV
Prop: APC 9X6
FC: F405-Wing (INav 2.5)
CRSF Diversity Rx
1. Put a spare motor to use that I had no idea what to do with.
2. CAD and 3D printing design skill improvement.
3. Expand on the EA build techniques to include 3D printed parts for unique configurations and easier repair/replacement of hardware after destructive crashes.
This is a work in progress, with lots of room for improvement and weight savings. My current version is ~2.1kg with a 4,000mAh 6S battery all the way up front against the front Bulkhead. Below is my parts list for electronics and the print materials & parameters I used for the first iteration.
AUW ~2kg (with GoPro)
Wingspan: 60 inches
Wing chord: 9.5 inches
Fuse Length: ~32 inches
Motor: Cobra 2820 840kV
Prop: APC 9X6
FC: F405-Wing (INav 2.5)
CRSF Diversity Rx
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!