TURN INDICATOR DUCATI PERFORMANCE STYLE FOR MONSTER

I made these indicators because after an accident I lost the original aluminum Ducati Performance ones, which were also very expensive. As threaded pins I used components obtained from cheap Chinese indicators. The same goes for the LED circuit. I glued the glass with the glue used for smartphone displays. However, among the files you will also find the glasses with holes for any screws, and a version of the indicator with a simple hole to use with a common threaded rod. In my case I drowned the pins in black hot glue. Inside, if you don't like LEDs, you can use simple lamp holders and traditional light bulbs. for printing I used petg, with my k1 using the default profile. 15% infill, and only for the part interested in the threaded rod I used a 50% infill. I also used brim, without any support, positioning them vertically. for the glass i used a strange transparent material, a sample that was given to me and i don't remember what it was (it was without packaging). in any case i would use transparent petg :)