Turtle (mirrored) clay cutter

Ninja Turtle (mirrored) clay cutter with a sharp edge, available in 20mm I have only tested on Bambu labs and have only use a 0.4mm nozzle, which produces great results. Arachne must be selected. Tips Roll clay to 2.5mm or thicker for a clean impression If clay is sticking, use cornstarch (or water seems to work well) and also do the double press method - press lightly and lift, then press again. Print settings 0.4 Nozzle 0.16mm layer 2 walls 15% infill but for best results I do often print with 100% infill Wall generator 'Arachne'