Thingiverse
TV Stand (Legs)
par ShaddyHour
0
Téléchargements
0
Likes
0
Makes
A simple design I've made in order to convert some old shelves in to a TV stand.
The shelves are incredibly strong under compression, more than capable of holding my own weight when I tested it so they can easily hold this 50" TV and a few games consoles or similar.
The design requires the sockets to be screwed in places but the legs are just held in place by the weight of the shelf on top of it.
I wouldn't build much higher than this as stability may become an issue though using some glue on the legs would help with that. I just wanted it to easily be disassembled and moved so didn’t use any glue.
Printed with a flsun Q5 Delta printer, 0.8mm nozzle, 0.6mm layer height. 5 perimeters, 100% infill.
The legs took about 50 minutes each to print and the sockets took around 25 minutes each.
The shelves are incredibly strong under compression, more than capable of holding my own weight when I tested it so they can easily hold this 50" TV and a few games consoles or similar.
The design requires the sockets to be screwed in places but the legs are just held in place by the weight of the shelf on top of it.
I wouldn't build much higher than this as stability may become an issue though using some glue on the legs would help with that. I just wanted it to easily be disassembled and moved so didn’t use any glue.
Printed with a flsun Q5 Delta printer, 0.8mm nozzle, 0.6mm layer height. 5 perimeters, 100% infill.
The legs took about 50 minutes each to print and the sockets took around 25 minutes each.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !