TwentyFour-7 2" Quad

Inspired by the RS90, FlexRC Owl and DJ105 enclosed prop designs, I have set out to make a capable 2S indoor and outdoor quad that you can easily create at home, add your own electronics stack and fly without fear of breaking.

There is now a 15x15/16x16mm slot and 20x20mm FC mounting holes on the top and bottom frames. If you want to use an AIO stack, you may need to fiddle a bit to get everything in - especially with a 20x20mm stack!

There are now larger slots top and bottom for the battery strap and the USB port is no longer covered by a standoff.

You can run in a pusher or puller prop configuration (I prefer pusher with reversed prop directions).

My build list:

2mm nylon hardware (x20 M2x10mm)
15mm standoffs (x10)
Racerstar 1103 motors (x4 10,000kv)
Gemfan 2040 quad blade props x4
Eachine Teenycube 15x15mm F3 Flight Controller with PDB
Racerstar 6A 1-2S ESC's (x4)
Runcam Nano FPV camera
Eachine VTX01 Super Mini 5.8G 40CH 25mW FPV Transmitter
Frsky R-XSR Rx