Thingiverse
Twerk Lidar Robot
von jdcc
6
Downloads
2
Likes
0
Makes
This is not an easy project to make.
All of the STLs, code is in the repo below.
https://github.com/jdc-cunningham/twerk-lidar-robot
Note dev branch is current
This robot has two different depth sensors, an IMU sandwiched inside.
The board is hand-wired so that's the part that makes this project tricky to make.
All of the STLs, code is in the repo below.
https://github.com/jdc-cunningham/twerk-lidar-robot
Note dev branch is current
This robot has two different depth sensors, an IMU sandwiched inside.
The board is hand-wired so that's the part that makes this project tricky to make.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!