TwipTwaks

These trackers are 13.4mm thick(62x50) about the size of a belt buckle. The goal was to make SlimeVR trackers that both where very small and comfortable with long battery life (7-10hrs depending on cells) and the ability to swap the bats out on the fly to keep playing. these support 40mm straps and can be used with smaller ones. all components are the same from original slimes minus the charge controller and lipo. we are adding these:

* .2mm copper sheet
* .4-.45mm pen springs
* Rechargeable AAA batteries (1100mah)
* AAA charger

Batteries that where tested are EBL 1100mah and can be found on amazon for fairly cheap. there is a solid copper strip that is inserted in the rear of the case before closing that should have a slight curve to it. this is used as the AAA contact pad inside. and 2 longer 4.5mm wide strips for + and - terminals that feed through the case, these should be bent inwards on the inside of the case during assembly. the - terminal is the outside most and the +