Thingiverse
Twisted Cup
von gustavorezende
40
Downloads
37
Likes
0
Makes
This cup was based on this one, made out of wood:
https://www.youtube.com/watch?v=bl45nkMaYvY
I thought it would look good if printed in 3D.
You can print the stem in other color, like the pictures uploaded.
I used 10% infill and 50% for the stem. After printing the first try I figured out that the base was kinda small and it could lacks stability, so I enlarged it a bit.
Just print and glue the parts together. Glue it upside down so that the glue does not run off.
Update 9/28/2021: Added a variant, with zigzag patterns.
https://www.youtube.com/watch?v=bl45nkMaYvY
I thought it would look good if printed in 3D.
You can print the stem in other color, like the pictures uploaded.
I used 10% infill and 50% for the stem. After printing the first try I figured out that the base was kinda small and it could lacks stability, so I enlarged it a bit.
Just print and glue the parts together. Glue it upside down so that the glue does not run off.
Update 9/28/2021: Added a variant, with zigzag patterns.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
