Thingiverse
Twisted lamp
di mistic100
10
Download
8
Likes
0
Makes
DISCLAIMER : A full power the COB strip becomes hot enough to soften the arms of these lamp. I don't recommend using PLA.
This is an experimentation for an organic lamp using LED strips.
I used this strip but you can use any 10mm wide strip https://aliexpress.com/item/4000145232270.html
You will also need a touch controller (https://aliexpress.com/item/1005002395129687.html) and a 5.5mm DC jack (https://fr.aliexpress.com/item/4000648876487.html)
The four "arms" are better printed vertically but because of their size the will wiggle. I recommend to split "one" and "two" in half and glue the halves together. Print all the arms without support and with a raft with 0mm first layer clearance. The base only needs standard support.
This is an experimentation for an organic lamp using LED strips.
I used this strip but you can use any 10mm wide strip https://aliexpress.com/item/4000145232270.html
You will also need a touch controller (https://aliexpress.com/item/1005002395129687.html) and a 5.5mm DC jack (https://fr.aliexpress.com/item/4000648876487.html)
The four "arms" are better printed vertically but because of their size the will wiggle. I recommend to split "one" and "two" in half and glue the halves together. Print all the arms without support and with a raft with 0mm first layer clearance. The base only needs standard support.
mistic100 pubblica anche su
30 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!