MakerWorld
3D Printer Parts
Voir le modèle
Two spools Holder
0
Téléchargements
1
Likes
0
Makes
This is a two (2) filament spools holder. It can easily be extended for more than two (2) spools.InstructionsPrint:2 x top-support.stl2 x middle-support.stl4 x Prusa i3 spool holder middle bar.stl2 x 8 mm rod filament guidesTo assemble it as shown on the pictures, you will need:to print 2 universal spool bushingoptionally 4 x 608ZZ bearing model (if you do not use real bearings)4 x 608ZZ bearings or bushings16 x 5/16" or 8 mm washers16 x 5/16" or 8 mm nuts2 x 16" (40 cm) 5/16" or 8 mm rods2 x 10" (26 cm) 5/16" or 8 mm rods2 x 6"1/4 (16 cm) 5/16" or 8 mm rodsAdapt the rod lengths if needed. The filament guides must be positioned perpendicularly to the natural filament direction. Otherwise, it might add some unwanted friction.You will also need some vitamins to build the base of the holder.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !