Two-Tone Sylvanas

Con solo dos colores , ilustración espectacular de la mano de epiccarry. Project: silvanasbeige.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.28x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.7mmFilaments Used: PLA Overture Chocolate Transmission Distance: 0.2 PLA BambuLab Basic Beige Transmission Distance: 8This print uses 2 unique filamentsSwap Instructions: Start with Chocolate At layer #13 (1.12mm) swap to Beige for the rest.