Thingiverse
TX22 Competition Compensator
por Paulby
11
Descargas
15
Likes
0
Makes
Ongoing project to make a compensator that perfectly matches the TX22 Competition.
Print with a high number of walls, infill is less important. I suggest a temperature resistant material.
The threads need to be tapped into the plastic using a 1/2x28 tap. These can be purchased on Amazon for cheap.
The STL and sketchup file contain both the compensator and a jig to aid in tapping the threads. Feel free to skip on using the jig but I found it useful.
To use the jig just insert the comp into the jig, clamp down in a vice, and tap the threads through the jig and the compensator both. This helps make sure the threads are perfect once the tap reaches the comp.
Print with a high number of walls, infill is less important. I suggest a temperature resistant material.
The threads need to be tapped into the plastic using a 1/2x28 tap. These can be purchased on Amazon for cheap.
The STL and sketchup file contain both the compensator and a jig to aid in tapping the threads. Feel free to skip on using the jig but I found it useful.
To use the jig just insert the comp into the jig, clamp down in a vice, and tap the threads through the jig and the compensator both. This helps make sure the threads are perfect once the tap reaches the comp.
Paulby también publica en
4 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
