Automotive
Zum Modell
Type 2 charging plug wall holder
62
Downloads
48
Likes
4
Makes
I was inspired by the design of Lindh3D's "[Type 2 cable holder](https://www.prusaprinters.org/de/prints/56898-type-2-cable-holder)". But I didn't like the idea to print it with support. Also I thought it could be improved for less material use and better mounting. So I went on to design my own version while taking ideas of different already existing prints. Here is what I came up with:
This model consists of 3 printed parts. Then you need something with ø3 mm diameter as an axle. Anything like a wire or nail would do. Just cut it to a length of 18 mm. Fix the lever in the holder with this and make sure it is flush on both sides. Put a spring in and slide the over on top of it. Then you have to mount it to the wall to get finished.
I recommend to print everything from PETG.
This model consists of 3 printed parts. Then you need something with ø3 mm diameter as an axle. Anything like a wire or nail would do. Just cut it to a length of 18 mm. Fix the lever in the holder with this and make sure it is flush on both sides. Put a spring in and slide the over on top of it. Then you have to mount it to the wall to get finished.
I recommend to print everything from PETG.
SplinterPrinter veröffentlicht auch auf
28 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!