Thingiverse
UAP Alien Probe
by Petal3D
1
Downloads
5
Likes
0
Makes
This UAP Alien Probe is based on a clip in ChaosMoogle BEST UFO Sightings Of THE YEAR! https://youtu.be/Lmme7_Smoyc time stamp 29:11 to 30:09.
A solid version and a hollow version of the UAP Alien Probe are included. Use the hollow version as an LED ornament, lamp or torch.
Scale as required. Print in PLA with at least 15% infill. Use supports as required.
For the solid version, glue the sections together, paint the cylinder chrome, and paint the “windows” matte black.
For the illuminated version, print the windows in lithophane white (or clear). Then glue in a 10mm diameter white LED and add batteries, wires, switch and possibly a current limiting resistor. In my circuit I used two white 10mm LEDs, a CR2032 battery and a corresponding holder. You could even make a wall mounted holder for the UAP Alien Probe.
A solid version and a hollow version of the UAP Alien Probe are included. Use the hollow version as an LED ornament, lamp or torch.
Scale as required. Print in PLA with at least 15% infill. Use supports as required.
For the solid version, glue the sections together, paint the cylinder chrome, and paint the “windows” matte black.
For the illuminated version, print the windows in lithophane white (or clear). Then glue in a 10mm diameter white LED and add batteries, wires, switch and possibly a current limiting resistor. In my circuit I used two white 10mm LEDs, a CR2032 battery and a corresponding holder. You could even make a wall mounted holder for the UAP Alien Probe.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!