Thingiverse
UBlox GPS Case
door Cynetics
28
Downloads
8
Likes
0
Makes
A small box to hold a Crius UBLOX Neo 6M GPS unit on a MultiCopter.
Very straight to forward print.
I've allowed a little space internally as the Crius units generally don't have the antenna lined up straight. The hole in the lid is slightly oversized also.
3mm holes for screws that hold lid on and mount the unit on the frame.
This unit will stack above my mavlink-OSD case..
http://www.thingiverse.com/thing:2280177
You can print without supports but I found the hole for the cable is better if you use supports.
stl's created in FreeCad.
I printed in ABS. Should be good with PLA.
PLEASE LET ME KNOW IF YOU FIND THIS USEFUL.
(Send me a picture )
Very straight to forward print.
I've allowed a little space internally as the Crius units generally don't have the antenna lined up straight. The hole in the lid is slightly oversized also.
3mm holes for screws that hold lid on and mount the unit on the frame.
This unit will stack above my mavlink-OSD case..
http://www.thingiverse.com/thing:2280177
You can print without supports but I found the hole for the cable is better if you use supports.
stl's created in FreeCad.
I printed in ABS. Should be good with PLA.
PLEASE LET ME KNOW IF YOU FIND THIS USEFUL.
(Send me a picture )
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
