uConsole Protection Case

OverviewThis case is designed for the uConsole with the HackerGadgets AIO board pre-installed. It features reinforced mounting locations for the four antennas so each antenna snaps in securely and stays in place during use. HingesUse 3 mm diameter, 30 mm long hinge pins (example: https://amzn.eu/d/g13dLjq).Insert the pins straight and check that the hinge rotates freely before final assembly.Hole calibration (recommended)Many hinge-pin holes are printed or punched slightly undersize or can become misshapen during manufacturing. To ensure smooth hinge action, use a 3 mm reamer to gently open and true the holes. Example: https://amzn.eu/d/gsn8QyP.Ream in small, controlled passes — test-fit the pin frequently until it slides in smoothly but without excessive play.Antenna mountsThe case provides four fixed antenna positions with snap-fit retention. Press each antenna into its slot until you hear or feel the snap — they should be secure but removable if needed.If an antenna is too tight, ca