Udoo X86 3D printed case

This is a case I designed for the Udoo X86. It's made to allow space for 1 SATA hard drive, position the antennas either on the top or side, and give access to the side ports + GPIO pins.

It's a very functional case, albeit not the slimmest, but it will protect the PC. There are mount points on the bottom to allow wood screws to wall mount the Udoo.

The orientation of the STL files are not correct, edit for best printing.

To assemble the case you will need:

4 x M3 20mm F-F Standoffs:

https://www.amazon.com/uxcell-Female-Threaded-Standoff-Pillar/dp/B015A3LIXE/ref=sr_ph_1?ie=UTF8&qid=1509749214&sr=sr-1&keywords=m3+20mm

4 x M3 40mm M-F Standoffs:

https://www.amazon.com/uxcell-Female-Thread-Stand-off-Spacers/dp/B00AO432J8/ref=sr_1_7?ie=UTF8&qid=1509749231&sr=8-7&keywords=m3+40mm+standoff

8 x M3 12mm screws:

https://www.amazon.com/uxcell-M3x12mm-Carbon-Countersunk-Socket/dp/B01E6EIC2S/ref=sr_1_5?ie=UTF8&qid=1509749307&sr=8-5&keywords=m3+12mm+countersunk

The SA