Thingiverse
Uebler I31 Camera Mount
di gimbogandalf
0
Download
0
Likes
0
Makes
Reverse camera mount for [Uebler i31 bike rack](https://www.uebler.com/en/portfolio/towbar-bike-rack-i21-i31/).
Notes:
1. It may fit other models as well like i21 but I didn't check it
2. The locking itself is done with a standard gopro screw and bolt. The bolt should be mounted in its place (in my print it holds it well without glue. if needed you can glue)
3. The camera model I used is [this](https://www.aliexpress.com/item/1005003243330048.html). It works well (no night vision though).
4. When camera is connected, you cannot fold the rack.
5. There is a long M5 thread on the side of the mount so you can make a hole in the rack and fasten it to the bike rack with a long M5 screw but in my print it holds VERY tight without screwing anything
Notes:
1. It may fit other models as well like i21 but I didn't check it
2. The locking itself is done with a standard gopro screw and bolt. The bolt should be mounted in its place (in my print it holds it well without glue. if needed you can glue)
3. The camera model I used is [this](https://www.aliexpress.com/item/1005003243330048.html). It works well (no night vision though).
4. When camera is connected, you cannot fold the rack.
5. There is a long M5 thread on the side of the mount so you can make a hole in the rack and fasten it to the bike rack with a long M5 screw but in my print it holds VERY tight without screwing anything
gimbogandalf pubblica anche su
5 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
