UFO 361 Hueforge

Guten tag Ihr könnt das Hueforge noch grösser Skalieren, jedoch darf die Z Achse nicht verändert werden.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #ff0d1a PLA Prusament Lipstick Red Transmission Distance: 3.3 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #10 (0.88mm) swap to Lipstick Red At layer #16 (1.36mm) swap to White for the rest.