Slicer Discord
UFO Hueforge – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

UFO Hueforge

19 Downloads
49 Likes
7 Makes
Go to Model
Project: UFO.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA Elegoo Neon Green Transmission Distance: 3.7 PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Army Blue At layer #12 (1.04mm) swap to Blue Gray At layer #13 (1.12mm) swap to Sunrise Orange At layer #15 (1.28mm) swap to Neon Green At layer #17 (1.44mm) swap to White for the rest.
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
large print
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
200 mm (Large)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection