Thingiverse
Ukulele holder
von garyduff
8
Downloads
4
Likes
0
Makes
This is a basic and quick to print ukulele holder which does not need any supports for printing. I printed mine at 0.2mm res and 20% infill.
There are 2 STL files with slightly different designs for different sized ukulele necks.
There is a brace that needs to be printed separately and then glued into the right position to suit your type of ukulele. If you need to widen or narrow the unit this can be done in your slicer by scaling slightly one of the axis.
There are 3 holes for fixing to a wall or you can just stick it to a wall with some 3M Command stickers which is what I did.
There are 2 STL files with slightly different designs for different sized ukulele necks.
There is a brace that needs to be printed separately and then glued into the right position to suit your type of ukulele. If you need to widen or narrow the unit this can be done in your slicer by scaling slightly one of the axis.
There are 3 holes for fixing to a wall or you can just stick it to a wall with some 3M Command stickers which is what I did.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
