UltiCube

This is my take on a small Ultimaker Clone.

**Update 19** (26.06.2020):
Added Mount for United Pro B3510X05B Fan.

**Update 18** (27.03.2019):
Small redesign of the Hotend fanmount and shroud. Updated the Fan Shroud and the 3 Point Leveling zip file.

**Update 17** (24.01.2019):
I redesigned the hotend mount and gantry mounts.
The new gantry mounts have a build-in belt tensioner.
The new hotend mount design now uses 2 LM8UU bearings instead of the bronze sinter bushings. I had the problem, that the bushings didn't fit the 8mm rods exactly. This caused the hotend to have some play on the rods and could wobble in some circumstances. The LM8UU bearings should fix this problem. Furthermore the new mount gives better access to the hotend.

Will update the pictures soon.




Print Area: 220x220x210 (X/Y/Z in mm)
Printer Size: 360x380x440 (X/Y/Z in mm)

Features:
- Using a RAMPS 1.4 board running on Klipper Firmware
- Raspberry PI with Octoprint
- LED Stripes with [c