Ultimate Filament Clip - Bambu Spools

Check out the new Version (for AMS and AMS 2 Pro) “AMS 2 Pro Universal Filament Clip for Bambu Lab Spools”. Mount to the right side of spool (when in AMS) to avoid collision with AMS guides on the left. Works perfect on the right side. I have tried many filament clips and none totally satisfied my needs. So I made my own. I now have two on every Bambulab spool.Featuring:Firm mount on Bambulab SpoolsAMS compatibleeasy handling (filament is held by the “zig-zag” and not by a hard to control narrow channel)There is two versions:The “normal” version was tuned with Bambu Basic PLA on X1C for a tight fit.The “loose” version was tuned for printed Bambu spools, as they usually come out with tighter holes.Slicing:0.2 mm layers are fine, recommend 4 perimeters and >30% infill. No supports, channel is easily bridged.Design Idea:The Zig-Zag filament mount made the difference for me. You can push the filament in from the side or “click” it in from the top. Since the channel is wider than the filame