Ultimate Filament Guide - Flashforge Creator Pro (Threaded)

I added threads to the filament guide to fit these [1/8" push connectors](https://smile.amazon.com/gp/product/B009ITFO78/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1). The threads were created using https://www.thingiverse.com/thing:193647. I attached the thread model as well in case someone has a use for them.

I did not use the dust filters with mine as I chose to use [these](http://www.thingiverse.com/thing:1359419) instead. I created a threaded version of them as well.

I believe these are the options I used. I have been making several threaded objects recently and was not as careful with my file names as I should have been.

head_type = hex
nut_type = normal
drive_type = socket
slot_depth = 2
head_height = 5
thread_length = 15
inner_diameter = 8
outer_diameter = 14
head_diameter = 12
countersink = 2
non_thread_length = 0
texture = exclude
drive_diameter = 5
facets = 6
nut_diameter = 12
socket_facets = 6
wing_ratio = 1
nut_thread_step = 2
thickness = 2
n