Free Other STL Download - Ultra Ballby Auggier23

This is the Ultra Ball from Pokemon. I built it because why not. Down below is how you should print this.Bottom: Rotate 90 degrees on X axis. Supports might be needed, I'm using supports (if that helps you decide.) (Color=White)Middle: Rotate 180 degrees on X axis. Supports needed, on build plate only. (Color=Black/Grey)Middle (Outline): No rotate needed. No supports needed. (Color=Black/Grey)Middle (Center): No rotate needed. No supports needed. (Color=White)Ultra Ball (Top, Without Strips): Rotate 90 degrees on X axis. Supports needed, build plate only. (Color=Black/Grey)Ultra Ball (Strips): Rotate 90 degrees on X axis. Supports needed, build plate only. (Color=Yellow)The (bottom) and (top) part should have a little rectangle thing. That should be able to slide into the little hole on the top and bottom of the (middle) piece. You push them in and then turn them. Then you add the (middle, outline) and the (middle, center) to lock it into place. Sadly, Nothing locks the strips into place, it just sits on top. With this model it would be difficult to make something to lock it in place. I will try to come up with something, but sadly I can't promise it. Thanks for understanding.