umber · lamp

umber · lampmodern minimalist table lamp, designed with a modular assembly approach for both style and functionality.Assembly is simple and intuitive:- Thread the power cable through the lamp body, allowing the plug to exit from the bottom.- Secure the light socket fixture into the connector.- Twist-lock the connector into the lamp body for a snug fit.- Route the power cable through the channel- Finally, place the shade over the connector, where it rests securely within the top lip.This modular design not only makes assembly effortless but also offers versatility and a clean aesthetic perfect for any modern interior. It includes two connector options, for either a 30mm or 40mm inner diameterdesign files are separated in three bambu studio print profiles, with options for .60mm nozzle and .40mm nozzle (on the file downloads) - I really enjoy the results from the .60mm nozzle, and also works best for filaments that have additives, such as the FormFutura organic rPLA that is shown in the photoscomponents dimensions:lamp ~ x:161 · y:161 · z:156connectors ~ x:173 · y:173 · z:5shade ~ x:166 · y:166 · z:130assembled dimensions ~ x:173 · y:173 · z:290photos show printed in organic rPLAlamp settings- hemp organic rPLA- .40mm nozzle / .60mm nozzle- variable layer height- 10% gyroid infill- outer/inner wallconnector settings (2 inner diameter options)- hemp organic rPLA- .40mm nozzle / .60mm nozzle- variable layer height- 10% gyroid infill- outer/inner wallshade settings- beer organic rPLA- .40mm nozzle / .60mm nozzle- .28 layer height / 0.42 layer height- 0.56 line width / 0.84 line width- spiral vase modenotes- includes bambu studio 3mf files and STLs- all photos uploaded are of the actual printed model, and are copyright protected- if you enjoy this model please consider to buy me a coffee · https://www.buymeacoffee.com/h3li0- commercial licence membership available on my patreon · https://www.patreon.com/h3li0