MakerWorld
Hueforge & Lithophane
Zum Modell
Umbrella
3
Downloads
1
Likes
0
Makes
Project: umbrella.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black: 0-0,88 PLA BambuLab Basic Orange: 0,88-1,28 PLA Kexcelled Blau: 1,28-1,44 PLA PolyLite White: 1,44-2,00
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!