Uncion # HueForge #

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 4 PLA PolyLite Dark Blue Transmission Distance: 4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 1 PLA BambuLab Basic Orange Transmission Distance: 1 PLA PolyLite Polymaker Teal Transmission Distance: 1 PLA Overture Silk Gold Transmission Distance: 2 PLA PolyLite Yellow Transmission Distance: 1 PLA BambuLab Basic Yellow Transmission Distance: 1 PLA BambuLab Basic Silver Transmission Distance: 1.7 PLA BambuLab Basic Jade White Transmission Distance: 1 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Blue At layer #8 (0.72mm) swap to Blue At layer #12 (1.04mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #15 (1.28mm) swap to Polymaker Teal At layer #18 (1.52mm) swap to Gold At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to Yellow At layer #24 (2mm) swap to