Uncle Scrooge Hueforge

Project: Picsou.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 168.02x235mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.6mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Bambulab Silk Cuivre Transmission Distance: 0.2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Bambulab Silk Silver Transmission Distance: 0.7 PLA Rosa Silk Gold Transmission Distance: 1.8 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Cuivre At layer #9 (0.8mm) swap to Black At layer #13 (1.12mm) swap to Jade White At layer #16 (1.36mm) swap to Silver At layer #18 (1.52mm) swap to Cuivre At layer #29 (2.4mm) swap to Gold for the rest. Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo How to print more than 4 colours with a single AMS: from 42 sec onwards in the video