Under Printer Poop Collector

Designed this under printer poop collector because i wanted something that was kinda quick to print and does not use a lot of filament. I also wanted something that was easy to put together. I have a few printers and wanted to stack them close together, this meant i had a lot of trouble getting to the poop collector. Works with P1S, P2S and X1C. I use X1/P1 Front Power Switch Extender - V2 with lock and P2S Front Power Switch Extender with lock which moves the switch to turn the machine on and off to the front making life so much easier. These are designed by https://makerworld.com/en/@jakadels. With the under printer collector and the front switch i can have my printer sitting close without needing to get to the back of the maching. The draws do need to be glued. I used a small amount of Araldite but any good self mixing epoxy will work. The chute for the poop slides into the back of the base and sit up almost flush with the printer. No need to screw, glue or magnets making it very ea