Underwold 2 poster - hueforge

Hueforge of an advertising poster for Underwold 2 - Evolution The photos shows the result in 200*150 and a nozzle of 0.4 You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.09x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.7mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) s