MakerWorld
Hueforge & Lithophane
Zum Modell
Unicorn HueForge
30
Downloads
26
Likes
15
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Bambu Labs Black Transmission Distance: 0.4 PLA Bambu Labs Cyan Transmission Distance: 2.3 PLA Sunlu HS Yellow Transmission Distance: 6.5 PLA Sunlu HS White Transmission Distance: 6.1This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Cyan At layer #12 (1.04mm) swap to Yellow At layer #17 (1.44mm) swap to White for the rest.
ogre56 veröffentlicht auch auf
15 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!