Thingiverse
Unicorn Light
par PaddeCreator
5
Téléchargements
17
Likes
0
Makes
I made a Unicorn lightbox after the Unicorn Gaming Discord channel logo
https://discord.com/invite/MgRzShbb
You can use an arduino nano and WS2812b led strip (code is in the files) or any other led strip you might have to light up the Unicorn
D6 is used to communicate with the led strip, use a 330/470 Ohm resistor to connect the arduino to the data input of the WS2812b led strip
There are 2 back plates:
the first one you can alter to your needs (e.g. via tinkercad)
the second one has a standoff for the arduino nano and a hole for a USB type-C breakout as shown in the picture. I used 4 (micro)screw 1,4 x 6mm to secure the nano in place --> do not overtighten :)
https://discord.com/invite/MgRzShbb
You can use an arduino nano and WS2812b led strip (code is in the files) or any other led strip you might have to light up the Unicorn
D6 is used to communicate with the led strip, use a 330/470 Ohm resistor to connect the arduino to the data input of the WS2812b led strip
There are 2 back plates:
the first one you can alter to your needs (e.g. via tinkercad)
the second one has a standoff for the arduino nano and a hole for a USB type-C breakout as shown in the picture. I used 4 (micro)screw 1,4 x 6mm to secure the nano in place --> do not overtighten :)
PaddeCreator publie également sur
3 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
