MakerWorld
2D Art
Zum Modell
Unicorn
78
Downloads
41
Likes
9
Makes
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Blue Transmission Distance: 1.8 PLA PolyLite Azure Blue Transmission Distance: 3.2 PLA PolyLite Purple Transmission Distance: 0.5 PLA PolyLite Pink Transmission Distance: 3.2 PLA PolyLite Lemon Yellow Transmission Distance: 4.7 PLA+ GST3D White Transmission Distance: 5.8This print uses 6 unique filamentsSwap Instructions: Start with Blue At layer #21 (0.96mm) swap to Azure Blue At layer #30 (1.32mm) swap to Purple At layer #36 (1.56mm) swap to Pink At layer #41 (1.76mm) swap to Lemon Yellow At layer #43 (1.84mm) swap to White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!