Unicorn on fire

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 128.43x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At lay