Uniden radar windshield mount

Low profile windshild mounts for Uniden radar. This mount uses the metal bracket (comes in the box with the radar) that you would normally use with the two clear suction cups. I created 2 versions (slide the metal bracket in from the bottom or from the top) that give flexiblity for preferred method of install. The model with the gap down the center is designed to slide the bracket from the top and down to the bottom. If using this mount make sure to give yourself enough room above the mount in the event you want to remove the bracket. The other model with the two tabs is meant to be mounted with the bracket slot facing down so the bracket is slid up and into the mount. Both models have arrows on the front that should face up for proper install. Tested with the R4 and the R8 brackets and both work with the mounts, assuming that other Uniden radar units (ie R7 and R3) have the same metal bracket then this will work with those as well. To install: 1. Print the desired mount (I printed the