Unifi G3-Instant-Variable angle window holder

Holder with variable angle setting for Ubiquiti Unifi G3 Instant camera. Can be used for looking down with angles more than 30° on window panes. Can be used with symmetry placement right or left. Internal cable setup. 3mf file uses 2 printplates Manual:1. Print both plates.2. Threaded holes need a final cut with cutting tools (M3, M4 and M6)3. Mount both parts for an initial test4. If ok, insert the cable from the back of the rotating part. Use a small pair of pliers for getting the angled front end out of the center outlet.5. Mount the fixed part and the suction cups. Two of them have M4 nuts, the other one fits into a threaded hole (M4)6. Mount the front part with the mounting plate of the camera (M3 countersunk screws). Two positions are possible, depending on the orientation of the fixed part (left or right)7. Place the cable in the notch of the fixed part. Place both printed parts, pointing in the same direction. It's important for the internal movement of the cable. Best acti