Thingiverse
Unitree Go2 AlmostDynoMutt head
von fastblinker
1
Downloads
3
Likes
0
Makes
Wasn't able to find a head for my Unitree Go2 anywhere online so I asked my friend (Clelio Rossi) to design one for me following my input. Here is the result that i'm making public so you guys don't run into the same problem.
I printed in PLA but when the robot falls the ears break off. If anyone would like to print me a nylon version i'll accept :) This version can be assembled beforehand and it will slip onto the front of the go 2 from the back and clips in place. The connection is solid but if the Go2 falls it pops off without causing damage to the G02 itself. I printed with 15% infill and 4 walls. You will also need 8 self tapping M3 screws. Print in natural position with tree supports touching baseplate. Here is a link to Clelio's other designs https://www.thingiverse.com/wybie/designs
IMPORTANT!!! uniform scale everything to 2000%
I printed in PLA but when the robot falls the ears break off. If anyone would like to print me a nylon version i'll accept :) This version can be assembled beforehand and it will slip onto the front of the go 2 from the back and clips in place. The connection is solid but if the Go2 falls it pops off without causing damage to the G02 itself. I printed with 15% infill and 4 walls. You will also need 8 self tapping M3 screws. Print in natural position with tree supports touching baseplate. Here is a link to Clelio's other designs https://www.thingiverse.com/wybie/designs
IMPORTANT!!! uniform scale everything to 2000%
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
