Slicer Discord
Universal Blade Holder – 3D-printbaar model van MakerWorld MakerWorld
Other Tools

Universal Blade Holder

32 Downloads
4 Likes
15 Makes
Model downloaden
I didn't want to spend $100 on 3 screws and 2 pieces of aluminum/steel. Behold, my version of a universal blade holder! BOM: 2x M4 screws (20mm works great)2x M4 nuts (Locking nuts preferred)4x M4 washers1x M6 Tap (If not using Heat Set Insert)1x M6 Heat Set Insert (If using)1x M6 screw (I will be using a thumb screw in the future - a 30mm screw works, but I need to test for the Heat Set Insert still.) There are 3 objects included in the file. 1 object uses 3d printed threads - These threads need to have an M6 tap run through them to work. 1 object has a tower for an m6 heat set insert - The Heat set insert is meant to be inserted from the flat (build plate) side of the model, into the tower. 1 object is the second side of the blade holder. It has a 100% infill cylinder for the jack screw to land on. Each holder has 4 M4 screw holes. Only 2 screws need to be used, but since different blades have various features on them, you have options in case the inner most holes are fouled by f
Categorie
Other Tools
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
2-delige montage
Hardware nodig
Supports 1/3
Montage 1/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie