Universal Boom Mic Arm

This is a desk clamp microphone arm stand with 3 degrees of freedom that has been fitted with a swappable microphone screw attachment and desk clamp. The mic screw are attached via screw holes and can be modified to what ever you want if you can design it :). The mic screw is attached to the mic arm with a 3D printed M8x1.25 thread that then turns into a custom made Logitech mic screw. I printed this arm with a P1S:Nozzle size: 0.6mmWall layers: 3, (recommended high wall count especially for the mic screw)Supports: only used on the bolts as they we printed horizontally (avoids layer line failures)infill: adaptive cubic 15%Rough print time: 6.5hrsTotal filament used: 332g Note: The nuts in the .mf3 file have been scaled to 110% and the clamp bolt and clamp head were scaled to 98% and 96% respectively as this lead to a better fit for me. If using the STLs some scaling may be required to the previously listed parts. Update: Attached the Step file for the project