Universal Card Dividers

This file will allow you to generate universal card dividers for board/card games or collectible cards. Use the parameters to set the height and width of the cards you want to divide. The label can be on the right, left, or middle, and is resizeable depending on your needs. You can change the text size to fill out the label size as desired. You can also leave the text parameter blank, and use a label maker to make labels. These labels come in tons of sizes, but 12x30 or 12x40 works nicely for most cards. Parameters: [Card Size] card_height: Default is 88 mm, this measures the height of the card.card_width = Default is 64 mm, this measures the width of the card.divider_thickness = Default is 1 mm, this is measuring the thickness of the divider (not including the text on the label, which is raised above and beyond this measurement). Choices are 1 mm, 1.2 mm, 1.4 mm. 1 mm is flexible but I’ve found it perfectly suitable. 1.4 is considerably stiffer.[Label] Label: The text that will be pri