Universal Filament Guide

I was looking for a filament holder that I could place on top of a dry box or on the table with the dry box below the printer. The best thing I found was the "(Revised) Filament Guide for Ender 3 PRO (with roller) by ShamloK August 04, 2022"
The original files are included but can also be found at https://www.thingiverse.com/thing:5448871
Since most dry boxes feed from the top, I wanted something that would give a 90 degree turn without causing any tension.
So, I made a new base that you can put double-sided tape on and stick it on top of your dry box or on the table next to the printer if your dry box is below the printer.
Also, I widened the top so I could create a hole so you can feed a 2 inch #6 bolt (or 3mm x 50mm bolt) through it to hold the spool on as I did not want to use a rod. I suppose you could lengthen the rod in in your slicer and glue it in place for a cleaner look if you don't want to use a bolt.
This is my first upload so I apologize if the pictures aren't lai