Universal Furniture Riser

This is a 3 part universal furniture riser set. It consist of a top piece, the middle expansion piece and a bottom/boot piece. The middle expansion piece can slot into itself so you can technically make this riser as high as you would like / feel comfortable with. The riser with the foot piece and the top piece gives a lift of 38.5mm (About 1.5 inches) and each extension adds another 24mm (About 1 inch). So all three pieces combined is about 62.5mm or about 2.5 inches of lift. Printing:I've printed the middle piece and the top piece inverted as the supports give the model a nice rough finish to better grip the furniture. I'd suggest printing the bottom piece in TPU, although it's not necessary. You must print a Top piece (Plate 1) and Bottom-Boot piece (Plate 3) in order for the riser to work. You can print as many middle extension pieces (Plate 2) as you need, each piece will raise the height by 24mm (About 1 inch). By default the 3mf I've provided is a 15% infill for